kinda like smacking your head against a wall isn't it?
The question remains unanswered........
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| starter box https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=18&t=2916 |
Page 1 of 1 |
| Author: | Jekyll_66 [ Tue Jan 24, 2006 01:01:22 ] |
| Post subject: | starter box |
Just to confirm - a standard starter box will work with this car? |
|
| Author: | mario [ Tue Jan 24, 2006 21:28:13 ] |
| Post subject: | |
HUDY has been working on an excellent starter box for 1/18 micro cars which should be available just few days after the NT18 will ship. It will be the most premium starter box, fully CNC machined from aluminum with countersunk holes so the screws do not protrude. The starter box will come with a powerful motor and with all the internal parts specially designed to work pefectly with the micro nitro cars. The starter box will work with one standard 7.2V battery pack and it will come fully assembled and set-up for immediate use with the NT18. An excellent tiny micro starter box - a must have for serious fans. Pictures should be availabe at HUDY web site www.hudy.net shortly |
|
| Author: | Jekyll_66 [ Wed Jan 25, 2006 04:02:39 ] |
| Post subject: | |
| Author: | Icey R/C [ Sat Feb 11, 2006 17:17:00 ] |
| Post subject: | |
| Author: | mario [ Tue Feb 14, 2006 11:51:03 ] |
| Post subject: | |
| Author: | Icey R/C [ Tue Feb 14, 2006 19:13:44 ] |
| Post subject: | |
| Author: | Jekyll_66 [ Wed Feb 15, 2006 20:51:36 ] |
| Post subject: | starter box |
kinda like smacking your head against a wall isn't it?
The question remains unanswered........ |
|
| Author: | ChrisP [ Wed Feb 15, 2006 21:04:14 ] |
| Post subject: | |
I don't have an official answer, but.... Any wheel device that can give you access to the flywheel could work... Smaller diameter wheels should work better due to the limited space for access to the flywheel... Due to the small distances between the wheels you may not be able to leave the car (or truck) on a regular starter box as (if there is any clutch drag at all) the wheels will rub on the box and potentially cause it to move, or stall out. Xray sells the car, they also sell a specific starter box for the car. Due to differences in sizes and heights of other starter box wheels, and their mechanisms, it's hard to give a blanket *yes* or *no* answer that normal boxes will work. |
|
| Author: | JC Borcy [ Wed Feb 15, 2006 23:06:58 ] |
| Post subject: | Re: starter box |
| Author: | Jekyll_66 [ Thu Feb 16, 2006 03:03:41 ] |
| Post subject: | |
| Author: | Icey R/C [ Fri Feb 17, 2006 23:04:11 ] |
| Post subject: | |
| Author: | JC Borcy [ Sat Feb 18, 2006 13:24:15 ] |
| Post subject: | |
I just recieve my HUDY START-BOX for micro cars 
HUDY MICRO START-BOX for 1/18 micro cars - H104300 - unique micro starter box for 1/18 nitro micro cars - ultra-small and compact size - fully assembled, ready to use - powered with a standard 7,2V battery stick pack - premium-quality, long-life drive belt system - adjustable posts - high-quality black coated aluminium one-piece housing |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|