| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| 808 setup book...mistake??? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=12&t=8706 |
Page 1 of 1 |
| Author: | vti-chris [ Thu Jan 22, 2009 16:22:04 ] |
| Post subject: | 808 setup book...mistake??? |
| Author: | xlgraphicspro [ Tue Feb 10, 2009 19:50:31 ] |
| Post subject: | |
| Author: | WheelNut [ Wed Feb 11, 2009 07:58:24 ] |
| Post subject: | |
Thats because in the setup book they have raising and lowering the roll centre reversed. They say that moving the inner camber link mounting up higher will lower the roll centre when it actually raises it. |
|
| Author: | vti-chris [ Wed Feb 11, 2009 08:29:16 ] |
| Post subject: | |
Actually that is correct on the book. Higher inner link point gives lower roll center Lower link point gives higher roll center thus the car rolls less in the turns and that's why i assumed there must be something wrong. Less roll means more responsiveness since it doesn't loose "energy" on rolling. |
|
| Author: | Martin Hudy [ Wed Feb 11, 2009 15:09:25 ] |
| Post subject: | |
from my experience, what is written in the set up book is correct. Sometimes theory is different than the real experience. Also roll centers are working different on low, medium, high traction, flat, bumpy track. |
|
| Author: | Eric Anderson [ Wed Feb 11, 2009 22:49:48 ] |
| Post subject: | |
Hi Martin! When are you coming back to the US for some racing? Eric Anderson "EA" |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|