| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| HELP!! What Servo? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=12&t=4558 |
Page 1 of 1 |
| Author: | Morgster [ Tue Nov 28, 2006 06:29:03 ] |
| Post subject: | HELP!! What Servo? |
| Author: | x-rayted [ Tue Nov 28, 2006 09:06:40 ] |
| Post subject: | |
| Author: | matt6005 [ Wed Dec 13, 2006 08:18:06 ] |
| Post subject: | |
i have a run of the mill airtronics in my t2 (went from me evo to the t1r and then to the t2) and it hav worked fine i also tried with the spektrum servos i ordered a ko motor and installed it in the servo and checked it with a servo spec checker and it put out 213 oz @ 60% in .009 wich is very respectable also what radio are you using ??? matt |
|
| Author: | Roelof [ Wed Dec 13, 2006 08:28:26 ] |
| Post subject: | |
The fastest I have ever seen are the Sanwa's But a lot of torque is not realy needed and you can make a trick with high torque servo's. Use a longer servo horn so you have to limit the range of the servo on your transmitter. The servo will have to move a smaller angle what will give a shorter moving time. |
|
| Author: | Morgster [ Fri Dec 22, 2006 02:30:02 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|