| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| One way failed https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=12&t=2912 |
Page 1 of 1 |
| Author: | Vertigo Performance [ Mon Jan 23, 2006 08:51:38 ] |
| Post subject: | One way failed |
| Author: | SuperXRAY [ Tue Jan 24, 2006 08:43:43 ] |
| Post subject: | |
Didn't want you too feel alone (no posts yet), so...I've not had this problem. I assume you perform routine lubrication with one-way lube? |
|
| Author: | Vertigo Performance [ Tue Jan 24, 2006 08:48:14 ] |
| Post subject: | |
Just taken apart and cleaned.. I know you get good and bad one ways, these INA HF 0612 bearings are very common and I am sure there are some bound to fail.. Just wondering if in this application it is common. Thanks, Clayton |
|
| Author: | Tonyv [ Tue Jan 24, 2006 10:13:08 ] |
| Post subject: | |
I had it once, and like you I had cleaned the bearing out. For this I was using motor cleaner which, I believe, maybe too aggressive causing the bearing to fall apart at some point. Since then I only clean them using a dry cloth and have not had any failures since. |
|
| Author: | Vertigo Performance [ Tue Jan 24, 2006 18:12:57 ] |
| Post subject: | |
| Author: | Tonyv [ Wed Jan 25, 2006 10:57:19 ] |
| Post subject: | |
| Author: | Stevo [ Thu Jan 26, 2006 07:17:05 ] |
| Post subject: | |
just a hello and im happy im in.lol |
|
| Author: | Mongo [ Mon Jul 10, 2006 04:17:57 ] |
| Post subject: | |
Me and another racer are both having issues with our one ways. They seem to be wearing out. Mine is about 3 months old ( probally ten packs a week ). Is there a life expectancy for these? What is the proper way to clean and maintain these? Do I have to buy an entire multi diff if I need to replace just eh bearing or center portion? |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|