| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Xray xb2 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=12&t=19208 |
Page 1 of 1 |
| Author: | Zkipperr [ Thu Dec 17, 2015 19:28:13 ] |
| Post subject: | Xray xb2 |
Have a problem that the car pulls quite hard to the left when giving hard throttle and the wheels spinning. Very frustrating to have to do corrections and countersteer to make the car to go straight when hitting throttle. Ofcourse steering trim is set and The car goes straight when just Rolling. Carpet track low/medium grip cut stagger front and Schumacher venom 88 in rear. Slipper is set as loose as it can be. Why is this and how do i fix it? Anyone else have this issue? /Jonas |
|
| Author: | Martin Bayer [ Fri Dec 18, 2015 11:50:42 ] |
| Post subject: | Re: Xray xb2 |
Hello I would like to help you with your problem. I never had this problem and also never heard about this. Can you send me pictures of your car, so I can see your set-up? |
|
| Author: | Zkipperr [ Mon Dec 21, 2015 18:22:08 ] |
| Post subject: | Re: Xray xb2 |
Hi. Its the same with box setup as with other setup. But think i found the "problem" Seems like the car is very senitive on rear camber. IF its not 100% the same left and right the car will pull to left or right. Think its the problem but not sure. Also have another issue that the car wants to keep rotating out of corners and doesnt like to square up. I run 4degree toe in rear. Battery in Middle or front. Gets even worse with battery in rear. Also The more camber the more grip i get wich is wierd. Tried different link pos/rollcenter. 3dot spring in front and 2dot rear. In slow speed the car is very loose in the rear and makes donuts in walking speed. |
|
| Author: | ovalalmanac [ Wed Mar 20, 2019 10:49:06 ] |
| Post subject: | Re: Xray xb2 |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|