| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Hudy Servo Horns V2 293501/2/3 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=12&t=18784 |
Page 1 of 1 |
| Author: | Adixtion [ Thu Aug 28, 2014 12:24:58 ] |
| Post subject: | Hudy Servo Horns V2 293501/2/3 |
Specifications for 293501/2/3 - old version Centre hole to centre hole 1st hole = 15mm 2nd hole = 19mm Perfect fit for 1/8 scale ____________________________________________________________ Specifications for 293501/2/3 V2 - new version Centre hole to centre hole 1st Hole = 15mm 2nd Hole = 19mm 3rd Hole = 23mm Total length = 30.5mm Fits like a hitchhikers thumb, unless u chop it off and bandage ___________________________________________________________ 1)This means if u have a 1/8 buggy or truggy....u will more then likely have to cut and grind this perfectly machined servo horn. 2)It will probably look like crap after spending $15 3)If anyone reading this has of the old 2 hole servo horns (293503)...please let me know. 4)Be aware that "most" online stores still show the old version and description, but its probably not what u will receive. ________________________________________________________________________________________________________ Message for the Hudy development crew... Why not just create another product for the V2. Keep the length of the old version (2 hole) and change the spline to accommodate the Futaba/Savox (293503)25T brushless servos. The customer who buys a Xray car with a FX motor and uses Hudy tools & accessories expects perfection. Nobody wants to massacre a hudy servo horn!!!!! Thank-you |
|
| Author: | brano [ Fri Sep 05, 2014 06:14:10 ] |
| Post subject: | Re: Hudy Servo Horns V2 293501/2/3 |
Thank you for the feedback - the R&D section from the HUDY company will look on this and take care. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|