XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
hudy breakin bench https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=12&t=13719 |
Page 1 of 1 |
Author: | tlyons68 [ Thu Oct 24, 2013 20:51:19 ] |
Post subject: | hudy breakin bench |
i was looking at the manual and it says to run so many tanks on 1/4 throttle and so many on 1/2 throttle and so many 3/4 throttle my question is do you vary the rpms up to the specified throttle range or just set it and let it be ? |
Author: | brano [ Fri Oct 25, 2013 15:49:27 ] |
Post subject: | Re: hudy breakin bench |
You can add full throttle for several seconds. You can actually run full throtlle all the time but you will need to have a very rich engine setting so the engine does not achieve the maximum RPM. |
Author: | tlyons68 [ Sat Oct 26, 2013 20:59:31 ] |
Post subject: | Re: hudy breakin bench |
So on the first tanks 4-5 it says 1/4 throttle do I set it there and run through 4-5 tanks or do I vary throttle during those tanks to 1/4 throttle .then do the same on 1/2 throttle for 4-5 tanks etc |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |