Hi
I have never come across that before in the 3 years i've been using hudy tools
What car are the screws in question on ?
Are you sure there not imperial size ?
Cheers
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Hudy Tool Question https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=12&t=1285 |
Page 1 of 1 |
| Author: | G30RGE [ Mon Mar 28, 2005 21:35:50 ] |
| Post subject: | Hudy Tool Question |
I recently scrapped all my c**p tools and invested in Hudy. Have to say all is well apart from........... The 1.5mm allen driver is over size (not by a lot) but it doesn't fit any of the 1.5 screws!! Can I send it back direct?? |
|
| Author: | RYD [ Mon Mar 28, 2005 21:44:06 ] |
| Post subject: | |
Hi I have never come across that before in the 3 years i've been using hudy tools
What car are the screws in question on ? Are you sure there not imperial size ?
Cheers |
|
| Author: | mario [ Mon Mar 28, 2005 21:59:24 ] |
| Post subject: | Re: Hudy Tool Question |
| Author: | G30RGE [ Tue Mar 29, 2005 00:02:52 ] |
| Post subject: | |
Ryd Used on HPI Pro4, (missed out on 1st batch of X Ray's  )
Mario Apologies - profile now complete - I haven't anything to hide 
I have tried it on new screws also. measuring with a digital vernier it measures 1.55mm across one side of flats and varies on the other 2 measurements (all + 1.5mm) |
|
| Author: | RYD [ Tue Mar 29, 2005 00:30:03 ] |
| Post subject: | |
Very Strange,like i said earlier i have never come across a manufacturing problem with any of the hudy products in 3 years of using them
Just making sure you wasn't trying to use metric drivers on a imperial based car such as the losi etc 
Our uk distributor is mirage as you probably allready know and i am sure like mario has said previously if you send the tool back there they will investigate and no doubt send you a replacement 
Cheers |
|
| Author: | mario [ Tue Mar 29, 2005 18:33:26 ] |
| Post subject: | |
| Author: | G30RGE [ Tue Mar 29, 2005 19:04:55 ] |
| Post subject: | |
| Author: | l150040 [ Thu Mar 31, 2005 13:51:21 ] |
| Post subject: | |
| Author: | G30RGE [ Thu Mar 31, 2005 14:13:56 ] |
| Post subject: | |
and here's me trying to convert my mind to metric 
You could be correct - although it was bought as part of a metric set! The problem is now solved thanks to Mario and great service from the UK distributor. Thanks to all |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|