XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Xray ESC driveshaft - problems with pins https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=12&t=12758 |
Page 1 of 1 |
Author: | Cipop [ Tue Aug 07, 2012 11:58:13 ] |
Post subject: | Xray ESC driveshaft - problems with pins |
Hello, I've brought the ESC driveshafts for my Xray T3 2012. And when the driveshafts were new the pins didnt sticked out. But now I've brought new pins (# 305390 & # 305391) and pins now stick out a little bit on each side (look at the picture) They are too long for aprox. 0.5 mm each. Is this normal ? File comment: Pins sticking out P8050067_kode_resize.jpg [ 52.32 KiB | Viewed 4469 times ] And there is alaso one mistake: in parts list of ESC driveshaft () it says that pins are 8.5mm & 9mm. But in instruction manual of driveshafts it says 8mm & 9mm. (look at the picture) File comment: Mistake Snap1.jpg [ 31.58 KiB | Viewed 4469 times ] Best regards Jan Popic |
Author: | Martin Hudy [ Tue Aug 21, 2012 07:48:01 ] |
Post subject: | Re: Xray ESC driveshaft - problems with pins |
Hi Jan, We made the pins longer by purpose. The reason for this is that in the past, some customers informed us that the pin fall out, therefore we made them longer to make sure that they do not fall out anymore. We need to correct the manual, thank you for information. |
Author: | Cipop [ Tue Aug 21, 2012 13:33:41 ] |
Post subject: | Re: Xray ESC driveshaft - problems with pins |
Ok, thank you for your reply. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |