| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XT2 Slipper Eliminator Problem https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=111&t=27271 |
Page 1 of 1 |
| Author: | tony814u [ Fri May 11, 2018 02:14:57 ] |
| Post subject: | XT2 Slipper Eliminator Problem |
I bought the xray 324100 slipper eliminator with the 69 and 72 gear. At my track I am using a 84 spur and 27 pinion with the slipper. By doing the math to end up with about the same gear ratio I will need to put the 72 eliminator gear with a 23 pinion. I can't slide the motor back enough to get on that small of a pinion. A 27 pinion is the smallest that will reach the 72 gear. Where can I find a larger eliminator gear so I can achieve the same gear ratio? |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|