| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Gearing ratio for Mongoese https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=9502 |
Page 1 of 1 |
| Author: | darmawaa [ Mon Jul 20, 2009 01:21:40 ] |
| Post subject: | Gearing ratio for Mongoese |
What gearing ratio for Mongoese 10.5 on M18T played on concrete/asphalt (stock tyre) |
|
| Author: | Mini_Me [ Mon Jul 20, 2009 07:13:16 ] |
| Post subject: | |
I haven't seen that size used locally, but from the performance of the 13.5, I would say to be safe, start out with a 10 or 11 tooth. Though those can be hard to find in 48 pitch in standard 540 shaft size (mongoose uses bigger shaft). |
|
| Author: | darmawaa [ Mon Jul 20, 2009 11:46:24 ] |
| Post subject: | |
| Author: | Mini_Me [ Tue Jul 21, 2009 10:27:34 ] |
| Post subject: | |
| Author: | Truck_Buster [ Wed Jan 27, 2010 06:09:00 ] |
| Post subject: | |
| Author: | rugzilla [ Thu Jan 28, 2010 02:30:18 ] |
| Post subject: | |
| Author: | Truck_Buster [ Thu Jan 28, 2010 10:29:26 ] |
| Post subject: | |
Racing. I noticed when building my car the motor screws from xray dont work for my 8.5 what screw does it take? Do I need a different motor mount to put this motor in my car? Any help would be great pics would be better. Thanks, Dan |
|
| Author: | rugzilla [ Thu Jan 28, 2010 19:04:06 ] |
| Post subject: | |
| Author: | Truck_Buster [ Thu Jan 28, 2010 22:37:13 ] |
| Post subject: | |
| Author: | fernandomi2001 [ Thu Jun 24, 2010 04:09:55 ] |
| Post subject: | Re: Gearing ratio for Mongoese |
Hi i want tu buy a mangoose kit for my M18 rtr. what lipo batery shoul i use and. should i use a voltage regulator to prevent damage the RX and standar servo??? |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|