| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Brakes on the Speedo https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=868 |
Page 1 of 1 |
| Author: | Big Jimmy G [ Fri Jan 21, 2005 00:29:51 ] |
| Post subject: | Brakes on the Speedo |
Hi, I am having problems with the brakes on my speedo. It is the upgrade speedo for the 300 size motor. It came with my car when I bought it second hand from a budy, and there are no instructions with it. I got it running by adjusting my handset trim so that there was no power at neutral and so that it rotated forward when I pushed the stick. So far, so good. I seen to have no brakes though. When I run on the track I hit the brakes and it just rolls gently to a stop - no chance to slow for corners or to avoid other cars. I am also concerned that at full stick movement the speedo is not acutally giving full power (it seems a bit slow). How can I set it up properly? How can I tell if i am actually getting full throttle and how can I set the brakes right? Thanks, James |
|
| Author: | mario [ Fri Jan 21, 2005 08:00:26 ] |
| Post subject: | |
I will check with the tech department. Please have a copy emailed to info@teamxray.com so there is record about your issue, so you can be sure you will get a response. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|