| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Aluminum Chassis for M18 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=8204 |
Page 1 of 1 |
| Author: | dirkrs [ Wed Sep 03, 2008 15:54:25 ] |
| Post subject: | Aluminum Chassis for M18 |
| Author: | Mini_Me [ Thu Sep 04, 2008 11:52:21 ] |
| Post subject: | |
| Author: | mikesalt [ Fri Nov 07, 2008 15:06:41 ] |
| Post subject: | |
| Author: | medlatek [ Mon Jan 26, 2009 11:27:26 ] |
| Post subject: | |
Bonjour, Je me demandais si quelqu'un ici aurait déj? tenté de modifier un châssis de NT18 pour le coller sur une M18 et pouvoir rouler sans crainte sur piste bitumée. A premi?re vu les dimensions correspondent et y a de la mati?re la ou il faudrait percer les trous pour les différents éléments. Ou, est ce que quelqu'un aurait les 2 châssis sous la main (le M18 6cells) et pourrait me faire un petit scan des 2 ? la m?me échelle pour que je puisse vérifier tout ça. Merci. Google translation (sorry): Hello, I was wondering if anyone here has already tried to modify a NT18 chassis to paste on a M18 and can ride without fear runway tarmac. At first view of the dimensions and there is the matter or should be drilling the holes for the different elements. Or, what someone would have the 2 chassis (the M18 6cells) and could get a scan of 2 to the same scale so that I can check it. Thank you. |
|
| Author: | street-spec [ Wed Feb 11, 2009 15:51:13 ] |
| Post subject: | |
I had the same thought. I got myself a NT18 Chassis and every hole fits , beside those MiniMe wrote about. This is my next project. Building a serious BL M18. If you wanna go with alluminum than buy a chassis. It is not that much. Remeber, you need to drill six perfectly fiited hole per axle if you wanna make your own one. There is no way to do that unless you are using CAD. |
|
| Author: | Roelof [ Wed Feb 11, 2009 17:59:00 ] |
| Post subject: | |
Somewhere in the past I started (never finished) to make a nitro model from my electric M18. |
|
| Author: | Lord Of Bracelets [ Wed Feb 11, 2009 18:36:35 ] |
| Post subject: | |
Is that an airplane engine? I like your idea. |
|
| Author: | Roelof [ Wed Feb 11, 2009 20:54:10 ] |
| Post subject: | |
In the base it is an airplane engine, it is an OSMAX FP10 (1.7cc), you find these in older 1/10 RTR cars. But the chsssis is simple made. Draw the original onto an aluminium plate. Use a iron saw, and grinding tools to cut it out. Then tape the original chassis onto the aluminium and drill the holes. Afterwards countersink them. 1 hour job...... |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|