This thread is very slow, I was hoping to find a few more M18T Pro setups.
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| M18T Pro Setup Sharing Thread https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=7503 |
Page 1 of 1 |
| Author: | Mini_Me [ Thu Apr 17, 2008 21:03:27 ] |
| Post subject: | M18T Pro Setup Sharing Thread |
| Author: | kant76 [ Fri Apr 18, 2008 11:53:13 ] |
| Post subject: | |
| Author: | jzbarry [ Sat Apr 19, 2008 21:50:56 ] |
| Post subject: | |
| Author: | mrspeedy [ Fri Apr 25, 2008 17:49:54 ] |
| Post subject: | |
| Author: | QIKAZZ [ Wed Mar 04, 2009 22:16:43 ] |
| Post subject: | |
This thread is very slow, I was hoping to find a few more M18T Pro setups.
|
|
| Author: | Krolleg [ Thu Mar 05, 2009 18:46:10 ] |
| Post subject: | |
| Author: | Krolleg [ Mon Mar 30, 2009 09:44:06 ] |
| Post subject: | |
| Author: | Ramstein [ Sat Apr 18, 2009 17:38:12 ] |
| Post subject: | |
| Author: | Thomas P [ Sun Oct 11, 2009 06:55:43 ] |
| Post subject: | |
Track Type Description: +Front+ Shocks: Alu Shock Oils: 1000w Pistons: 2 Spring: Silver hard Preload: 2mm Internal Droop Spacers: 5mm Shock Angles: (alu tower,arms just under level) Shock angle bottom arms: Outer Shock angle top arms: Middle Toe In/Out: 1 out Swaybars: Sway Bars: On Sway Bar MM thickness: 1.5mm Tires: Foam Compound/Type: Gecko - 35 Dimensions: 55mm/18mm Traction compound: Carpetjack CA: Yes edge Micell: front diff hard +Rear+ Shocks: Alu Shock Oils: 1000w Pistons: 2 Spring: Black medium Preload: 4mm Internal Droop Spacers: 7mm Shock Angles: (Alu tower) Shock angle bottom arms: Outer Shock angle top arms: 3rd from top Toe In: not adjusted yet Swaybars: Yes Sway Bars: On Sway Bar MM thickness: Stock Tires: Foam Compound/Type: Gecko - 32 Dimensions: 55mm/22mm Traction compound:Carpetjack CA: Edge Micell: middle diff +Chassis+ Weight Balance or layout: Motor,Esc and servo on rightside, Rx on front left Micell: Xray M18T Pro +Electronics+ Motor:eZrun 7800 rpm/v Gearing:Stock/16T Specifics Notes:Alu rear and front carriers - NT hex - Alu towers - XXX4 wing mount. Using M18T Pro parts on the truck. Mini LST jConcept lid UPDATE |
|
| Author: | Thomas P [ Tue Nov 03, 2009 07:19:16 ] |
| Post subject: | Setup Halmstad Indorrs 1/18 OR Race |
Track Type Description: Smooth,technical and fast | Halmstad Sweden +Front+ Shocks: Alu Shock Oils: 1500w Pistons: 2 Spring: Yellow hard Preload: 2mm Internal Droop Spacers: 5mm Shock Angles: (alu tower,arms just under level) Shock angle bottom arms: Outer Shock angle top arms: Outer Toe In/Out: 1 out Swaybars: Sway Bars: On Sway Bar MM thickness: 1.5mm Tires: Foam Compound/Type: UFRA 42 Dimensions: 55mm/18mm Traction compound: Carpetjack CA: Yes edge Micell: front diff hard +Rear+ Shocks: Alu Shock Oils: 1000w Pistons: 2 Spring: Black medium Preload: 5mm Internal Droop Spacers: 7mm Shock Angles: (Alu tower) Shock angle bottom arms: Outer Shock angle top arms: 3rd from top Toe In: 1 in Swaybars: Yes Sway Bars: On Sway Bar MM thickness: Stock Tires: Foam Compound/Type: UFRA 42 Dimensions: 55mm/23mm Traction compound:Carpetjack CA: Edge Micell: middle diff +Chassis+ Weight Balance or layout: Motor,Esc and servo on rightside, Rx on front left Micell: Xray M18T Pro +Electronics+ Motor:eZrun 7800 rpm/v Gearing:Stock/16T Specifics Notes:Alu rear and front carriers - NT hex - Alu towers - XXX4 wing mount. Using M18T Pro parts on the truck.Stock lid, Tamiya frog ving |
|
| Author: | Thomas P [ Sun Nov 15, 2009 18:51:20 ] |
| Post subject: | |
Updated setup for my local track, big jumps...changed, Oil,internal limiters and preeload... | The car is amaizing!! the previous setup is outperformed.. Track Type Description: Smooth,technical and fast big jumps +Front+ Shocks: Alu Shock Oils: 80 OFNA Pistons: 2 Spring: Yellow hard Preload: 4mm Internal Droop Spacers: 0mm Shock Angles: (alu tower,arms just under level) Shock angle bottom arms: Outer Shock angle top arms: Outer Toe In/Out: 1 out Swaybars: Sway Bars: On Sway Bar MM thickness: 1.5mm Tires: Foam Compound/Type: UFRA 42 Dimensions: 55mm/18mm Traction compound: Carpetjack CA: Yes edge Micell: front diff hard +Rear+ Shocks: Alu Shock Oils: 80 OFNA Pistons: 2 Spring: Black medium Preload: 4mm Internal Droop Spacers: 4mm Shock Angles: (Alu tower) Shock angle bottom arms: Outer Shock angle top arms: 3rd from top Toe In: 1 in Swaybars: Yes Sway Bars: On Sway Bar MM thickness: Stock Tires: Foam Compound/Type: UFRA 42 Dimensions: 55mm/23mm Traction compound:Carpetjack CA: Edge Micell: middle diff +Chassis+ Weight Balance or layout: Motor,Esc and servo on rightside, Rx on front left Micell: Xray M18T Pro +Electronics+ Motor:eZrun 7800 rpm/v Gearing:Stock/16T Specifics Notes:Alu rear and front carriers - NT hex - Alu towers - XXX4 wing mount. Using M18T Pro parts on the truck.Stock lid, Tamiya frog ving |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|