Dude, this sucks
...it doesn't fit. There's one set of six wholes around the can and only one screw can go into the can at a time. The other screw hole is too far out to fit.
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| None of my parts are fitting https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=7216 |
Page 1 of 1 |
| Author: | ToysRUsKid [ Sun Mar 02, 2008 06:42:04 ] |
| Post subject: | None of my parts are fitting |
| Author: | Mini_Me [ Sun Mar 02, 2008 08:40:47 ] |
| Post subject: | |
| Author: | ToysRUsKid [ Mon Mar 24, 2008 20:10:23 ] |
| Post subject: | |
| Author: | ToysRUsKid [ Tue Mar 25, 2008 03:34:56 ] |
| Post subject: | |
Dude, this sucks ...it doesn't fit. There's one set of six wholes around the can and only one screw can go into the can at a time. The other screw hole is too far out to fit.
|
|
| Author: | ToysRUsKid [ Tue Mar 25, 2008 03:41:03 ] |
| Post subject: | |
Anybody got a pic or had to do some cutting to get this to fit? I did a search and I see others are using it so someone help me out please. |
|
| Author: | ToysRUsKid [ Tue Mar 25, 2008 04:17:36 ] |
| Post subject: | |
Finally got it on after a little force and playing...now gotta wait for that servo to come from amain. |
|
| Author: | Mini_Me [ Tue Mar 25, 2008 04:21:42 ] |
| Post subject: | |
The Mamba can should have at least 2 different mounting hole spacing (4 holes with too larger and further out). If not either you got one of the original batches of Mambas, or CC has changed or deleted the extra mounting options. If all else fails, with the composite mount, you can elongate the inner hole with an exacto to allow more mounting options. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|