XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Pictures M18 PRO / Standard https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=7193 |
Page 1 of 1 |
Author: | dirkrs [ Tue Feb 26, 2008 18:04:18 ] |
Post subject: | Pictures M18 PRO / Standard |
Author: | puschmannn [ Thu Feb 28, 2008 00:33:52 ] |
Post subject: | |
hi dirkrs. i highlighted the receiver red due to the bad photo-quality. i´m using a much too big, old acoms receiver and i couldn´t lay it down, cause then i wouldn´t be able to reach the switch from the speedcontroller and it also deformed the body on the side....my good old acoms receiver-counterweight ![]() all my other parts are original xray like the accu, the speedcontrol, the servo and the 370 supersize motor. greets, puschmannn |
Author: | dirkrs [ Thu Feb 28, 2008 17:20:58 ] |
Post subject: | |
I can`t see anything. ![]() |
Author: | puschmannn [ Fri Feb 29, 2008 02:39:14 ] |
Post subject: | |
ohjemine^^ my webcam surely has a very bad quality. however: i planted the receiver above the servo and the speedcontrol. any other small receiver would have fitted right above the servo, but my old acoms is just too big ![]() ![]() ![]() yours, puschmannn p.s.: icq: 205096778 or puschmannn@hotmail.com at messenger bye |
Author: | jmasnik [ Fri Feb 29, 2008 08:54:48 ] |
Post subject: | |
Inside of my M18... |
Author: | dirkrs [ Fri Feb 29, 2008 18:15:45 ] |
Post subject: | |
Exactly the same I had imagined that. So now more of it.... ![]() |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |