Pretty much 99% of 1/10th 48p pinions in that case. Xray makes some as well for the T2 series.
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Will this pinion work? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=7005 |
Page 1 of 1 |
| Author: | rocketpop [ Sun Jan 27, 2008 22:45:57 ] |
| Post subject: | Will this pinion work? |
Will this pinion work on the M18? I know I need a 48P but is the one the correct one? I'm using a Team Orion Coreless everything else is stock. ~Link to HK pinion~ |
|
| Author: | Mini_Me [ Sun Jan 27, 2008 22:50:01 ] |
| Post subject: | |
It would, but many Asian micro pinion Manufacturers are mistakingly or purposely listing .5module metric as 48 pitch, when in fact they are not. .5 is slightly finer. It will work, but your car wont sound as quiet. The stock composite pinions work fine. Especially if you are only running a 180 size motor. They also last a looong time, and your car is quiet. |
|
| Author: | MarkusP [ Mon Jan 28, 2008 15:49:24 ] |
| Post subject: | |
Which pinion should I use for Novak's new Mongoose 380 brushless motor. It has a 1/8" shaft. I have the M18 Pro with steel spur gear and I would like to use a 48P steel pinion. Any ideas who makes such pinions? Thanks. |
|
| Author: | Mini_Me [ Mon Jan 28, 2008 16:58:14 ] |
| Post subject: | |
Pretty much 99% of 1/10th 48p pinions in that case. Xray makes some as well for the T2 series.
|
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|