| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Brushless help https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=6906 |
Page 1 of 1 |
| Author: | MarkusP [ Fri Jan 11, 2008 17:47:15 ] |
| Post subject: | Brushless help |
I'm lokking into a brushless race system form my M18T PRO but I'm not sure which one would work best with a 2-cell LiPo setup. The motor options are as follows: 6000KV 7300KV 9000KV It should be a race setup. I was thinking about 7300KV but I'm not sure if this KV rating would be too high. Also, if I would get any pinion suggestions that yould be great. Thanks, Markus |
|
| Author: | Mini_Me [ Fri Jan 11, 2008 20:25:50 ] |
| Post subject: | |
Really depends on the track, but 6kv is about right for racing. Too high a KV will cause cogging, make the throttle less linear, and more money spent in damaged parts from hitting walls. |
|
| Author: | MarkusP [ Fri Jan 11, 2008 20:38:40 ] |
| Post subject: | |
Great, thanks for your help. I'll get the 6000 KV one. |
|
| Author: | oldcarguy [ Sun Jan 13, 2008 18:46:32 ] |
| Post subject: | |
From my experience, on 2 lipos they will all be very fast. I can hardly tell the difference between a 5600 kV and an 8000kV. |
|
| Author: | Mhejjas [ Sun Jan 13, 2008 21:44:23 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|