XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
m18t pro on track test https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=6857 |
Page 1 of 1 |
Author: | kant76 [ Thu Jan 03, 2008 16:14:13 ] |
Post subject: | m18t pro on track test |
Author: | mario [ Sat Jan 05, 2008 15:36:17 ] |
Post subject: | |
Author: | Thomas P [ Thu Jan 24, 2008 14:21:02 ] |
Post subject: | |
Kant, any updates on running the Pro Truck?..had a few bucks over and might test one...could be fun to run it...i know my old M18T was real geat, but this one? will be a lot better? Any,any tip,ideas etc would be greatfull to get. have a few parts,and diffs etc since i run the 18Pro..but what servo etc should i use..Mamba,tekin? or even the titanic Mongoose :/..let me know. |
Author: | kant76 [ Fri Feb 01, 2008 20:16:31 ] |
Post subject: | |
Author: | Mini_Me [ Fri Feb 01, 2008 20:38:42 ] |
Post subject: | |
Author: | kant76 [ Tue Feb 05, 2008 22:44:21 ] |
Post subject: | |
thanks mini me I had missed that. but got a hold on the hs 82 today, so this night are going to be in the building corner. after a crash last wedensday I got my antenna pulled out of the resiver and my hs 81 have had some bad glitches(sins the first time I used it) so I´m going to preap the car for tomorrows evening race and installe the new servo and my backup resiver if I don´t have any spare antenna wire I can solder on to the one there are in the car now. also the dampers are going to be rebuilded and I have to install orings on the shaft outside the bodys of the dampers to prevent the littel diafram in the top of the schock absorber from beeing dammaged when the schock are bottomning out. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |