| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Maxamps lipo for m18pro? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=6574 |
Page 1 of 1 |
| Author: | benngearthquake [ Mon Nov 12, 2007 10:17:15 ] |
| Post subject: | Maxamps lipo for m18pro? |
Hi all, I would like to get a Maxamps lipo pack for a m18pro, at maxamps.com they tell you the measurements for all their packs, but I don't know which one will fit with the graphite battery strap. Please if anyone has a m18 or a pro, please tell me what is the battery size that will fit? Thanks to all. |
|
| Author: | AreCee [ Mon Nov 12, 2007 16:19:30 ] |
| Post subject: | |
This size will just fit the Pro; 96mm x 34mm x 13mm (LxWxH). I have a Cellpro 2S 2100mah stuffed in my Pro. You will need to either tape down the pack to the chassis or pad the underside of the battery strap with foam, etc.. |
|
| Author: | ttppll [ Mon Nov 12, 2007 16:25:56 ] |
| Post subject: | |
The Maxamps 1550HV pack fits great in the Pro with no modifications needed. |
|
| Author: | benngearthquake [ Mon Nov 12, 2007 23:46:48 ] |
| Post subject: | |
| Author: | AreCee [ Tue Nov 13, 2007 00:25:56 ] |
| Post subject: | |
Mamba 25 with 6800Kv motor. Run time about 45+ minutes. |
|
| Author: | xokrates [ Mon Nov 26, 2007 21:37:58 ] |
| Post subject: | |
| Author: | AreCee [ Tue Nov 27, 2007 00:11:40 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|