| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| New M18 Pro build - Issues and Questions https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=5914 |
Page 1 of 1 |
| Author: | jinzo [ Sat Jul 28, 2007 08:57:51 ] |
| Post subject: | New M18 Pro build - Issues and Questions |
| Author: | Mini_Me [ Sat Jul 28, 2007 19:25:56 ] |
| Post subject: | |
| Author: | jinzo [ Sun Jul 29, 2007 05:24:48 ] |
| Post subject: | |
| Author: | Mini_Me [ Sun Jul 29, 2007 06:13:20 ] |
| Post subject: | |
| Author: | jinzo [ Sun Jul 29, 2007 16:28:57 ] |
| Post subject: | |
| Author: | Mini_Me [ Sun Jul 29, 2007 20:18:56 ] |
| Post subject: | |
I run about 3mm at ride height. It all depends on your track and what you are after. In example, I run on asphalt. You can look at one of if it will help you. (Currently only shows correctly in IE) |
|
| Author: | jinzo [ Mon Jul 30, 2007 02:39:38 ] |
| Post subject: | |
Thanks for the link. It helped out some. Right now the droop on the front of my car is about +1.6mm, as best as I can measure. If I lower it any more than that then the ball cups on the steering linkage start to rub and hit the edges of the chassis. From your setup sheet I would assume that you are using the adjustable turnbuckle in the front as well, yet you have a lower droop. Do you have any problems with clearance of the steering linkage? |
|
| Author: | Mini_Me [ Mon Jul 30, 2007 05:53:20 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|