XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Hello did anyone had this too or is it a glitch? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=5626 |
Page 1 of 1 |
Author: | WimHam [ Thu Jun 07, 2007 00:11:22 ] |
Post subject: | Hello did anyone had this too or is it a glitch? |
I just got my m18mt today. And loads of stuff went wrong despite the shop i ordered is a well known respected shop here in the Netherlands they must have had a party the night before or so hehe. Basically they included the 180 stock engine with 5 cell battery powerpack anyway a new one is underway. But here is my question. I had an unopened m18mt box with the building instructions etc still sealed in plastic along with them the stickers for the NitroM18mt body, as well as the NitroM18mt body. Anyway it looks ok so we will see if it fits. |
Author: | WimHam [ Thu Jun 07, 2007 17:11:56 ] |
Post subject: | |
While waiting on my powerpack i started to assemble my truck and the next lil problem is around the corner. I have 2 front differentials in my kit. The rear one is missing. I am still optimistic about this truck but allready 2 parts in my box that are wrong?? is someone sleeping at the assembly line? Wim |
Author: | davx [ Thu Jun 07, 2007 17:59:15 ] |
Post subject: | |
Hi WimHam, The front and rear differentials are the same, they're just put in the opposite way... Hope it helps. Tchao |
Author: | WimHam [ Thu Jun 07, 2007 19:11:19 ] |
Post subject: | |
I know they are the same, my problem is i got 2 bag's with the same number. So i got 2 times the bag nr 1 and i miss bag nr 2. So i miss the spur gear and i also miss one of the composite rings that you put on each side of the differential. The ring that is missing doesn't have an order nr either it's part of 385002 I also have 3 times 385531 where you only need 1. They probably mixed one of those rings up with the composite ring you put on the sides of the main diff and one of the rings should be the spur gear. Hopefully it all turns allright. Wim |
Author: | brano [ Fri Jun 08, 2007 07:24:36 ] |
Post subject: | |
Please contact your distributor in Netherlands at Bert.Trumpie@serpent.com who will let you know how to proceed. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |