hello guys ive now had trouble with my mamba 6800 package. it startet with a motor that sized to work after 12 times on the track. so bought a new motor hyperion 6000kv short can and that one works ok but the mamba esc acts up all the time now. if turned on sometimes it just turns on red light and wont run but still shows the signal for forward or reverse action with the yellow or red flashes but no motor action.. ive tried to change every wire and do new solders and got new plugs for wires but still the same
only thing i havent done is to check if the hmm dont know the english name for it capasitator? the one thats soldered between + - wire to batt from esc. could that be my problem?
i have always raced only 2 cell lipos 1300mah 30/30c and im running 54spur and 11 pinion one a technical track. the esc is configured trough the usb kable on a pc and the settings are max in every categori except reverse. what colud my problem be? hope to get help
many thanks