thanks!
i bought the engine! fits perfect and runs like mad
the engine seems to get pretty hot at the end of the run.
but still touchable (barely) but all seems fine
advice, do use a 6 cell pack.
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| 300r powerpack esc capabilities. https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=5455 |
Page 1 of 1 |
| Author: | Capone [ Thu May 10, 2007 10:50:32 ] |
| Post subject: | 300r powerpack esc capabilities. |
Hi! i was wondering what size/turn the powerpack esc could handle. i know it works with the 370 size xray engine and a 19t reedy 300 motor, but my local store sells reedy 370 sized 17t motors. i read a few post where guys seemd to use a 14t motor on the standard powerpack esc. can i use the reedy 17t on the esc? thanks in advance. |
|
| Author: | Mini_Me [ Fri May 11, 2007 08:06:17 ] |
| Post subject: | |
I would think so. But I can't say definitely. You might try contacting xray support if you really need a more concrete answer. |
|
| Author: | Capone [ Mon May 21, 2007 13:22:41 ] |
| Post subject: | |
thanks! i bought the engine! fits perfect and runs like mad
the engine seems to get pretty hot at the end of the run. but still touchable (barely) but all seems fine
advice, do use a 6 cell pack.
|
|
| Author: | geezatec [ Mon May 21, 2007 18:38:51 ] |
| Post subject: | |
With a hotter motor, try a smaller pinion. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|