XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
XM300 with 2C Li-Po? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=5169 |
Page 1 of 1 |
Author: | Stanley Wangsanegara [ Thu Mar 15, 2007 19:31:29 ] |
Post subject: | XM300 with 2C Li-Po? |
Author: | FOXY923 [ Thu Mar 15, 2007 19:41:16 ] |
Post subject: | |
Author: | Mini_Me [ Thu Mar 15, 2007 23:31:59 ] |
Post subject: | |
Its only rated .2 volts more than a 6 cell ni-mh. I don't see why not. The main problem is your going to have to watch your runtimes as to not go below 6 volts as that esc doesn't have a lipo cutoff. |
Author: | Stanley Wangsanegara [ Fri Mar 16, 2007 06:41:08 ] |
Post subject: | |
Hahahaha.. Hi FOXY923.. I'm really and surely just a human like You guys.. : ) I'm concentrating myself to drive 1/8th scale I.C. Off Road so I believe You guys are more experienced than me.. : ) I just see that M18 Pro is a really nice car to be race with, especially in a rainy seson.. : ) Btw, thanks for the info Mini_Me.. Concerning the voltage cut-off device, I believe I read it somewhere that NOVAK already made one.. |
Author: | FOXY923 [ Fri Mar 16, 2007 14:32:04 ] |
Post subject: | |
Author: | andytea [ Tue Mar 20, 2007 18:52:52 ] |
Post subject: | |
Author: | Mini_Me [ Tue Mar 20, 2007 22:44:05 ] |
Post subject: | |
Author: | Stanley Wangsanegara [ Wed Mar 21, 2007 04:37:44 ] |
Post subject: | |
Author: | andytea [ Wed Mar 21, 2007 15:20:28 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |