XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
servo for the MT ( HS-225 MG ?) https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=5015 |
Page 1 of 1 |
Author: | Tyrefryer [ Mon Feb 12, 2007 23:41:50 ] |
Post subject: | servo for the MT ( HS-225 MG ?) |
at the moment I have the ![]() although I had no "centering problems" at the beginning, it seems that the gear has "worn out" after 1 year I have searched through the forum, and it looks like the ![]() but then I saw the ![]() ![]() ![]() (I am aware, that this would need some modification) has anyone tried this already ![]() ![]() |
Author: | geezatec [ Tue Feb 13, 2007 00:16:59 ] |
Post subject: | |
225 will need modification it's 3mm bigger then the 81's. The 85's are the same sizes as 81's no mod needed. I run 85MG/BB(ball Bearings) on my M/NT18 works well for steering. Been about 11 months now, with no problems. |
Author: | Tyrefryer [ Tue Feb 13, 2007 00:24:32 ] |
Post subject: | |
hi ![]() also noticed that the servo-horn of the 85 is a little bit more outside (compared to the 81) but according to your post, this is no "problem" ![]() thx |
Author: | geezatec [ Tue Feb 13, 2007 02:20:16 ] |
Post subject: | |
81's & 85's have same dimension. 85MG/BB has a smoother action then 85MG. And yes no problems with them. |
Author: | Mini_Me [ Tue Feb 13, 2007 10:40:37 ] |
Post subject: | |
The 85mg is actually a mm longer, but it still fits fine. Here is a insider tidbit I found. The is based around the Hitec 85mg with Multiplex's digital circuitry. Ultra fast with plenty of torque. That servo you linked to is a bit too big to fit stock. |
Author: | Tyrefryer [ Tue Feb 13, 2007 18:38:25 ] |
Post subject: | |
Author: | geezatec [ Tue Feb 13, 2007 20:16:50 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |