| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Steering https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=4989 |
Page 1 of 1 |
| Author: | Grego852001 [ Fri Feb 09, 2007 03:09:55 ] |
| Post subject: | Steering |
I can't seem to get my car to go perfectly straight. Everytime I try to trim it, it still tends to go off center(left or right). I own the M18 pro. So if anyone has any ideas please help. Thanks, Greg |
|
| Author: | Mini_Me [ Fri Feb 09, 2007 03:56:46 ] |
| Post subject: | |
Sounds like a servo problem. What servo are you using? |
|
| Author: | Grego852001 [ Fri Feb 09, 2007 06:32:35 ] |
| Post subject: | Steering |
| Author: | brano [ Fri Feb 09, 2007 08:19:59 ] |
| Post subject: | |
| Author: | geezatec [ Fri Feb 09, 2007 09:03:06 ] |
| Post subject: | |
| Author: | Grego852001 [ Fri Feb 09, 2007 10:44:24 ] |
| Post subject: | Steering |
| Author: | Mini_Me [ Fri Feb 09, 2007 15:54:06 ] |
| Post subject: | |
| Author: | geezatec [ Fri Feb 09, 2007 19:05:23 ] |
| Post subject: | |
| Author: | Grego852001 [ Sat Feb 10, 2007 02:08:41 ] |
| Post subject: | steering |
| Author: | geezatec [ Sat Feb 10, 2007 17:35:13 ] |
| Post subject: | |
Check your toe-in, M18 is set 2.5 degrees. Which I think is over done. 1/2deg - 1 deg, is fine. The diff adjustment also check. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|