| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Ball bearings M18T/MT https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=4910 |
Page 1 of 1 |
| Author: | Sleurhutje [ Fri Jan 26, 2007 11:19:06 ] |
| Post subject: | Ball bearings M18T/MT |
I've wrecked a few ball bearings during bashing in the sand. They've become a kind of one way bearings.  So I wanted to order some new ones, but the part no. isn't available in any (web)shop in the Netherlands. My question is if the M18T/MT bearings #930610 are interchangable with the M18 bearings #309040. The outside diameter is the same since the M18 and M18T use the same turnbuckles.
|
|
| Author: | brano [ Fri Jan 26, 2007 11:45:46 ] |
| Post subject: | |
The #309040 ball bearings were replaced with #930610 Ball-Bearing MR106ZZ 6x10x3 (2) or you can get the optional #940610 High-Speed Ball-Bearing 6x10x3 Rubber Sealed (2), more info you can find here at http://www.teamxray.com/teamxray/produc ... rod_id=972 Contact your distributor in Netherlands at Bert.Trumpie@serpent.com who will let you know where to get it. |
|
| Author: | Mini_Me [ Fri Jan 26, 2007 11:48:21 ] |
| Post subject: | |
Yes, but the m18 is missing the bearings for the steering bellcrank. Here is another option to really help with your problem: |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|