If you place the left upper suspension arm on the right side but upside down, it's also fitted correctly. And vice versa for the right one.
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| quick [stupid] question https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=4517 |
Page 1 of 1 |
| Author: | Zray [ Sat Nov 18, 2006 07:44:45 ] |
| Post subject: | quick [stupid] question |
| Author: | Fantomas [ Sat Nov 18, 2006 09:30:58 ] |
| Post subject: | |
| Author: | Zray [ Sat Nov 18, 2006 09:37:23 ] |
| Post subject: | |
| Author: | Sajo [ Sat Nov 18, 2006 12:04:02 ] |
| Post subject: | |
| Author: | Mini_Me [ Sat Nov 18, 2006 16:20:51 ] |
| Post subject: | |
| Author: | Tyrefryer [ Sat Nov 18, 2006 20:04:02 ] |
| Post subject: | |
| Author: | Sleurhutje [ Sun Nov 19, 2006 00:32:14 ] |
| Post subject: | |
If you place the left upper suspension arm on the right side but upside down, it's also fitted correctly. And vice versa for the right one.
|
|
| Author: | Sajo [ Sun Nov 19, 2006 12:26:05 ] |
| Post subject: | |
| Author: | geezatec [ Mon Nov 20, 2006 17:41:57 ] |
| Post subject: | |
FL & FR, Frt left & frt Right. Like to have them showing. Cuz, easier to install the pivot ball for one. Easier to read what you have on. M18 It shows a 6 or 12 0n it telling the caster angle what you;re using. So, letters up. |
|
| Author: | Zray [ Mon Nov 20, 2006 18:27:56 ] |
| Post subject: | |
cool thanks guys. sorry i didn't say what truck i had. i have the m18t. i'm still getting that binding but i guess if i stop hitting the boards, that's the real solution! hahaha |
|
| Author: | Fantomas [ Tue Nov 21, 2006 02:44:49 ] |
| Post subject: | |
Like mini me asked... Are you sure you have steering hub extensions installed.. I was having a issue if I clipped the wall or hit/got hit by another racer I would pop apart my plastic universal.. The problem was those steering hub extensions kept coming up over the bottom arm and extending the knuckles to the extreme right or left and popping apart my universals. So to fix problem I glued little plastic stops on top of the bottom arm to prevent the hub extensions from come up over the bottom arm and over extending.. Here is a pic |
|
| Author: | Sleurhutje [ Tue Nov 21, 2006 12:18:20 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|