| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XRAY graphite chassis shorter than plastic? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=3188 |
Page 1 of 1 |
| Author: | builthatch [ Sun Mar 05, 2006 20:47:15 ] |
| Post subject: | XRAY graphite chassis shorter than plastic? |
Yesterday i bought a graphite XRAY chassis (brand new, in the bag conversion kit) and i noticed when i went to put my body back on after assembly, the front posts were a few mm behind the holes left from when the body was on the stock chassis...also, the antenna hole was a few mm forward. So, comparing the old plastic chassis side by side vs. the graphite chassis, and also atop each other, if i line up the back holes on the new chassis vs. the back holes on the old chassis, the front holes on the new chassis are a few mm behind the front holes on the old plastic chassis. What's up with that? it's shorter somewhere in the middle. |
|
| Author: | ChrisP [ Mon Mar 06, 2006 06:06:10 ] |
| Post subject: | |
Which kit is this you are referring to? I converted my M18T to graphite and everything fit perfectly? Perhaps just check and verify that you have the towers mounted in the proper holes on the top deck? |
|
| Author: | builthatch [ Mon Mar 06, 2006 06:35:25 ] |
| Post subject: | |
m18 touring car |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|