XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
one way - what shall i do with the old front diff?? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=2855 |
Page 1 of 1 |
Author: | howe222 [ Sat Jan 14, 2006 16:44:37 ] |
Post subject: | one way - what shall i do with the old front diff?? |
Hello, I just bought the one way diff and I wonder, what I should do with my old front diff ?? The track I normally race, is really high speedand raceway! Is it possible to use the front diff as rear diff, or should I better buy the alu Adj. ball Diff Any ideas?? Ciao |
Author: | Roelof [ Sat Jan 14, 2006 19:22:33 ] |
Post subject: | |
Just use it as a spare diff. When 1 of the 2 in the car is broken you can always use this one to go on. |
Author: | howe222 [ Sat Jan 14, 2006 21:30:46 ] |
Post subject: | |
hello, understood - but shouldn't be an advantage to use the front diff - rear - so I'm able to adjust the diff Maybe to adjust the rear diff is not necessary?? Ciao |
Author: | Mini_Me [ Sun Jan 15, 2006 05:23:00 ] |
Post subject: | |
So you have the old adjustable gear diff with the screw? You could use it in the rear if you wanted, however you usually want the rear diff looser than the front anyways which the older adjustable gear diff wasn't as free as the rear. Also I would recommend if your using a one-way up front, to have a ball diff in the rear. Your adding alot of stress to that drivetrain. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |