Just be patient a bit
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Where are the springs? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=2463 |
Page 1 of 1 |
| Author: | tunnelhead [ Mon Oct 24, 2005 09:41:11 ] |
| Post subject: | Where are the springs? |
Can anyone tell me why the heck Xray hasnt made optional springs for the M18? Come on, just give us four to six to chose from. Am I asking to much? |
|
| Author: | mario [ Mon Oct 24, 2005 20:26:25 ] |
| Post subject: | |
Just be patient a bit
|
|
| Author: | tunnelhead [ Tue Oct 25, 2005 18:53:27 ] |
| Post subject: | |
| Author: | JC Borcy [ Wed Oct 26, 2005 00:14:25 ] |
| Post subject: | |
Will be adjustable shock absorbers too? I think that setting the ride height with downstops is wrong. But it's only way to set ride height or with some other brand springs and rings. |
|
| Author: | WeeDrifter [ Wed Oct 26, 2005 17:56:28 ] |
| Post subject: | |
I mess with 10th scales, they need adjustable dampeners, but on something this small and low to the ground its useless to have shocks with adjustable collars for ride height... the springs would definately be good though, leave em black and put paint markings on the bottom of the coil to identify the spring rate
|
|
| Author: | FOXY923 [ Thu Oct 27, 2005 05:21:18 ] |
| Post subject: | |
| Author: | tunnelhead [ Wed Nov 02, 2005 01:30:38 ] |
| Post subject: | |
| Author: | k_bojar [ Wed Nov 02, 2005 17:41:07 ] |
| Post subject: | |
guys, you can run mini-t springs on your trucks until xray get's the M18T's springs out you need to get the upper spring retainer from an associated RC18T..Remove the stock sping, slide on the upper spring retainer, they put on the Mini-T spring... |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|