XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
my new m18 cant just go straigh line!!! help me https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=1989 |
Page 1 of 1 |
Author: | micro18 [ Wed Jul 20, 2005 19:36:18 ] |
Post subject: | my new m18 cant just go straigh line!!! help me |
Author: | XofPL [ Thu Jul 21, 2005 21:49:08 ] |
Post subject: | Re: my new m18 cant just go straigh line!!! help me |
Author: | micro18 [ Fri Jul 22, 2005 16:52:50 ] |
Post subject: | reply |
Author: | Slava [ Fri Jul 22, 2005 19:56:59 ] |
Post subject: | |
Author: | oXYnary [ Sat Jul 23, 2005 08:57:47 ] |
Post subject: | |
Wouldnt the 4 degree give more straight line stability? micro18, no the rs4 is way worse. Unscrew the arms, disconnect the unversals from the outdrives, and make sure all 4 wheels spin free without binding. Then cheack to make sure the diff action is smooth for each side. If not, open the diff and while rebuilding it, make sure you got off all the burrs. Make sure the shocks are in the same position for boths ides. Then check that your tweak screws are balanced (meaning you dont have one screwed alot further through the arm than the other side). Lastly look to make sure your body or something else isnt catching a tire when your moving. Other than that, buy some higher traction tires. |
Author: | micro18 [ Tue Jul 26, 2005 16:37:57 ] |
Post subject: | cool |
thanks guys, now im getting some close straigh line.........I put some grease that came withe the mrs4 into the diff gears but now my m18 is making a rare noise , is like the diff gear is no spining smooth or losing contact sor something....... what it could be? should i remove the grease........ |
Author: | oXYnary [ Thu Jul 28, 2005 00:59:22 ] |
Post subject: | |
Author: | micro18 [ Fri Jul 29, 2005 15:53:11 ] |
Post subject: | |
Author: | oXYnary [ Sun Jul 31, 2005 17:33:34 ] |
Post subject: | |
Author: | Roelof [ Sun Jul 31, 2005 19:32:05 ] |
Post subject: | |
Author: | rugzilla [ Fri Aug 12, 2005 20:35:30 ] |
Post subject: | |
Author: | micro18 [ Fri Oct 14, 2005 23:49:36 ] |
Post subject: | |
Author: | Mini_Me [ Sat Oct 15, 2005 02:02:13 ] |
Post subject: | |
Author: | minimad [ Sun Oct 16, 2005 11:27:30 ] |
Post subject: | |
Author: | Mini_Me [ Sun Oct 16, 2005 23:48:17 ] |
Post subject: | |
Author: | minimad [ Mon Oct 17, 2005 10:19:08 ] |
Post subject: | |
Author: | Mini_Me [ Mon Oct 17, 2005 11:03:08 ] |
Post subject: | |
Author: | minimad [ Tue Oct 18, 2005 11:01:41 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |