XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
suspension m18 ?? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=1574 |
Page 1 of 1 |
Author: | howe222 [ Sun May 08, 2005 21:36:54 ] |
Post subject: | suspension m18 ?? |
Good evening, When I press the car down and release - the front suspension is pushing the car all the way up to the origin - the rear suspension is only move back 2/3 of the way - OK ???? Thanks Ciao |
Author: | x-per [ Sun May 08, 2005 22:30:11 ] |
Post subject: | |
Hi! Cant you just tighten up the rear suspension? I hade the same symptoms on my 1/10 and problems solved just by turning the "ring" on the suspension. |
Author: | oXYnary [ Sun May 08, 2005 22:54:15 ] |
Post subject: | |
Check your rocker balls for binding. Take the shocks and rims/wheles off, and see if the suspension arms move freely by themselves. Also, are you using aftermarket shorter springs? SOme of them purposely do not not settle at full height. |
Author: | howe222 [ Mon May 09, 2005 07:14:36 ] |
Post subject: | |
Author: | Roelof [ Mon May 09, 2005 08:54:28 ] |
Post subject: | |
If you had build it from the manual you have mounted little spacers on the front shocks..... |
Author: | howe222 [ Mon May 09, 2005 22:06:17 ] |
Post subject: | |
@ Roelof: I built it, according to the manual - yes I use little spacers only on the front shocks |
Author: | Roelof [ Mon May 09, 2005 23:17:59 ] |
Post subject: | |
Author: | Icey R/C [ Fri May 13, 2005 17:35:13 ] |
Post subject: | |
Or put some spacers on the rear? ![]() |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |