suspension m18 ??

howe222 · **Joined:** Thu Oct 14, 2004 21:53:55 **Posts:** 8

Good evening,

When I press the car down and release - the front suspension is pushing the car all the way up to the origin - the rear suspension is only move back 2/3 of the way - OK ????

Thanks
Ciao

x-per · **Posted:** Sun May 08, 2005 22:30:11

Hi!

Cant you just tighten up the rear suspension?

I hade the same symptoms on my 1/10 and problems solved just by turning the "ring" on the suspension.

oXYnary · **Joined:** Sat Sep 11, 2004 13:06:40 **Posts:** 137

Check your rocker balls for binding. Take the shocks and rims/wheles off, and see if the suspension arms move freely by themselves.

Also, are you using aftermarket shorter springs? SOme of them purposely do not not settle at full height.

howe222 · **Joined:** Thu Oct 14, 2004 21:53:55 **Posts:** 8

Roelof · **Posted:** Mon May 09, 2005 08:54:28

If you had build it from the manual you have mounted little spacers on the front shocks.....

howe222 · **Joined:** Thu Oct 14, 2004 21:53:55 **Posts:** 8

@ Roelof:

I built it, according to the manual - yes I use little spacers only on the front shocks

Roelof · **Posted:** Mon May 09, 2005 23:17:59

Icey R/C · **Posted:** Fri May 13, 2005 17:35:13

Or put some spacers on the rear?

XRAY - Model racing cars

suspension m18 ??

Who is online