XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Pinion with steel spur? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=11523 |
Page 1 of 1 |
Author: | badbandit [ Wed Jun 22, 2011 18:54:16 ] |
Post subject: | Pinion with steel spur? |
i just got the Xray M18T Pro, which is really nice and promises a lot of fun. i installed the steel spur (because i will drive outside) and ordered some alu pinions. the not very cheap 13 pinion was stripped within 2 minutes (this is my first stripped pinion). what is the best combination, when driving outside? steel/delrin? steel/alu? steel/steel? delrin/delrin? delrin/steel? although i feel that the xray-support is one of the worse on the earth, i would be very happy to get some answers and some help. |
Author: | iRoC_nOtU [ Wed Jun 29, 2011 08:00:58 ] |
Post subject: | Re: Pinion with steel spur? |
I run steel/steel.. Lil bit of sand pabbles every once in awhile. But way better then plastic. Hope that helps I run in mud and off road outdoor tracks |
Author: | Mini_Me [ Sun Jul 03, 2011 00:21:07 ] |
Post subject: | Re: Pinion with steel spur? |
If you run the steel spur, you need to run the steel pinions Xray offers. |
Author: | badbandit [ Tue Jul 26, 2011 19:06:50 ] |
Post subject: | Re: Pinion with steel spur? |
thanks for your answers. i found out, that the delrin pinions work very well and have no wear. i just ordered some more from xray which are larger for more speed ![]() |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |