XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
XMC - 180 esc https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=1131 |
Page 1 of 2 |
Author: | microed [ Sun Feb 27, 2005 16:23:56 ] |
Post subject: | XMC - 180 esc |
I bought a used M-18 with the xmc-180 power pack installed. I did not get any documentation with it so I am unsure about how to set up the esc. Is it forward only? Does it have brakes or reverse? |
Author: | hdsport82 [ Sun Feb 27, 2005 16:49:49 ] |
Post subject: | |
From what I read on their site, It has brakes and reverse. It also states that you can only use it with the stock motor, not recomended for the mod motors. If its like the xmc-300, there is no settup. Just turn it on and its ready to go. |
Author: | mario [ Sun Feb 27, 2005 21:53:23 ] |
Post subject: | Re: XMC - 180 esc |
Author: | brano [ Mon Feb 28, 2005 09:02:20 ] |
Post subject: | |
Author: | microed [ Sun Mar 06, 2005 16:22:49 ] |
Post subject: | |
Author: | FOXY923 [ Tue Mar 08, 2005 17:36:54 ] |
Post subject: | |
I just had the same problem with my esc-180. Not sure how to fix it though. |
Author: | mario [ Mon Mar 14, 2005 12:40:06 ] |
Post subject: | |
Author: | FOXY923 [ Mon Mar 14, 2005 17:09:23 ] |
Post subject: | |
I've been using the Xray battery packs. Got any sugestions? |
Author: | mario [ Mon Mar 14, 2005 20:24:03 ] |
Post subject: | |
Author: | FOXY923 [ Mon Mar 14, 2005 22:47:04 ] |
Post subject: | |
Author: | Roelof [ Mon Mar 14, 2005 23:23:39 ] |
Post subject: | |
Author: | mario [ Tue Mar 15, 2005 10:56:48 ] |
Post subject: | |
Author: | FOXY923 [ Tue Mar 15, 2005 18:06:26 ] |
Post subject: | |
Author: | FOXY923 [ Fri Mar 18, 2005 20:24:16 ] |
Post subject: | |
Author: | Slava [ Fri Mar 25, 2005 14:55:59 ] |
Post subject: | |
Author: | mario [ Sat Mar 26, 2005 14:01:51 ] |
Post subject: | |
Author: | Slava [ Tue Mar 29, 2005 11:45:11 ] |
Post subject: | |
http://www.teamxray.com/teamxray/showfi ... le_id=1281 Instruction.pdf quote: >>XMC180 Technical Data >>Input Power: >>4-6 cell battery NiMH or NiCD / 4.8V-7.2V >>Min. Resistance : 0.138 / 7.5V >>Max. Resistance : 0.206 / 6V So Is it really intended to be use with 5cell only? How can I understand it from this document? Who takes care about Distribution in Belgium? I will try to write to bert.trumpie@serpent.com. Will se what I get. |
Author: | mario [ Tue Mar 29, 2005 18:31:37 ] |
Post subject: | |
Author: | Slava [ Tue Mar 29, 2005 18:45:07 ] |
Post subject: | |
Author: | Slava [ Mon Apr 18, 2005 13:25:58 ] |
Post subject: | |
Page 1 of 2 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |