XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
What servo specs ?? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=10901 |
Page 1 of 1 |
Author: | ojnab [ Fri Oct 29, 2010 11:32:57 ] |
Post subject: | What servo specs ?? |
Hi there. What servo specs are required/recommended for the M18?? speeed torque Cheers |
Author: | Mini_Me [ Sat Oct 30, 2010 04:05:39 ] |
Post subject: | Re: What servo specs ?? |
Here is list from FAQ. There are more of course. What are you looking at in particular? Stock (fits mount) * Xray XMS01MG * Hitec 81MG/S * Hitec 82MG/K * Hitec 85MG (requires spacers) * Hitec 5082MG * Futaba s3101 * Futaba s3102 * Hobbico CS-12MG * Muliplex Polo Digi 4 * Multiplex Tiny S Non Stock- not recommended (does not fit mount. Have to shoe-goo/servo tape in) * Hitec HS-5X series (Smaller-non stock mount, need to find another or adapt servo saver) * AE/Airtronics series (Smaller-non stock mount, need to find another or adapt servo saver) * KO 947 (larger, may or may not fit stock servo saver) |
Author: | ojnab [ Sat Oct 30, 2010 04:22:21 ] |
Post subject: | Re: What servo specs ?? |
Hi there. I saw the list in the FAQ ![]() Its a little bit out of date now, or some of those are hard to get/no longer made. I'm after recommended speed & torque, even if its just speed & torque of the OEM kit servo. In the meantime I bought a "Hitec 85MG (requires spacers)" , but would like to get a Futaba if I can find a good one at a good price. ![]() Why does 85MG need spacers?? Will just any old spacer the right height do?? Cheers |
Author: | Mini_Me [ Sat Oct 30, 2010 05:33:39 ] |
Post subject: | Re: What servo specs ?? |
The stock servo has near the same speed torque as a hitec 81mg |
Author: | Roelof [ Sat Oct 30, 2010 11:26:30 ] |
Post subject: | Re: What servo specs ?? |
Everything arround 2.5 to 3kg torque with metal gear will do fine, the speed is up to you what kind of track you are driving. I am running the Hitec HS5084mg and I do love it. It is digital, it is precise with steering, has enough torque and with 0.05 sec it is pretty fast. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |