| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| servo seized up https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=11&t=10189 |
Page 1 of 1 |
| Author: | visual_rabbi [ Sat Feb 13, 2010 19:53:21 ] |
| Post subject: | servo seized up |
The servo xms 01-mg on my m18 has seized up. And yes, if you are thinking I probably didn't have a servo savor, you are correct. I do not have one. This is my first m18 (or 1/18 scale for that matter) and I'm learning. So, my question is: Can I salvage this unit? Or, is it a throw away and time to get a new servo? |
|
| Author: | Roelof [ Sat Feb 13, 2010 21:46:34 ] |
| Post subject: | |
If only the gears are broken you can purchase a new set of gears. I can not tell for reat but the story is that it is the same servo as a Hitec HS81-MG Currently I use a Hitec HS5084mg, it is a very high speed servo (0.05 sec) and digital. And it is adviseable to use a servo saver (Xray option) |
|
| Author: | geezatec [ Mon Feb 15, 2010 01:26:33 ] |
| Post subject: | |
| Author: | visual_rabbi [ Mon Feb 15, 2010 06:05:07 ] |
| Post subject: | thanks |
| Author: | Mini_Me [ Mon Feb 15, 2010 07:41:03 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|