XRAY - Model racing cars

Hi there.
What servo specs are required/recommended for the M18??
speeed
torque

Cheers

Here is list from FAQ.

There are more of course. What are you looking at in particular?


Stock (fits mount)

* Xray XMS01MG
* Hitec 81MG/S
* Hitec 82MG/K
* Hitec 85MG (requires spacers)
* Hitec 5082MG
* Futaba s3101
* Futaba s3102
* Hobbico CS-12MG
* Muliplex Polo Digi 4
* Multiplex Tiny S


Non Stock- not recommended (does not fit mount. Have to shoe-goo/servo tape in)
* Hitec HS-5X series (Smaller-non stock mount, need to find another or adapt servo saver)
* AE/Airtronics series (Smaller-non stock mount, need to find another or adapt servo saver)
* KO 947 (larger, may or may not fit stock servo saver)

Hi there. I saw the list in the FAQ
Its a little bit out of date now, or some of those are hard to get/no longer made.

I'm after recommended speed & torque, even if its just speed & torque of the OEM kit servo.

In the meantime I bought a "Hitec 85MG (requires spacers)" , but would like to get a Futaba if I can find a good one
at a good price.
Why does 85MG need spacers?? Will just any old spacer the right height do??
Cheers

The stock servo has near the same speed torque as a hitec 81mg

Everything arround 2.5 to 3kg torque with metal gear will do fine, the speed is up to you what kind of track you are driving.

I am running the Hitec HS5084mg and I do love it. It is digital, it is precise with steering, has enough torque and with 0.05 sec it is pretty fast.