| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| SHOCK REBOUND https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=109&t=19363 |
Page 1 of 1 |
| Author: | Toroloco [ Thu Jul 07, 2016 11:32:23 ] |
| Post subject: | SHOCK REBOUND |
Hi, I'm trying to build the center shock without rebound but no way to get it right. I even drilled the top cap an took the foam out. The minimum rebound I've got it's 70% without having air in the shock. It's not the first shock I've build but this one is getting me crazy. And yes I followed the manual step by step. The next thing I will change the top bladder maybe this will help? Thanks for any help. Claude |
|
| Author: | RaThEiSkY [ Mon Jul 11, 2016 09:39:32 ] |
| Post subject: | Re: SHOCK REBOUND |
Hi Claude, I never have Problems with that. Its just a little longer shock as we use in TC nothing different. So you fill in oil, remove the air, push the shaft in and set the bladder + cap. If you have it like 20% dont worry, but around 70% is way to much  Do you maybe dont push the shaft inside while setting the cap ? greetings Jan |
|
| Author: | Toroloco [ Mon Jul 11, 2016 10:29:39 ] |
| Post subject: | Re: SHOCK REBOUND |
Hi Jan, Thanks for the reply but I've tried every thing pushing, pulling an so on. With a new bladder it's better I'm around 30 %. I never had such issue like that in 20 years of RC Cars. I think I will leave it that way an see if it will affect my setup in the wrong way. Greetings Claude |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|