XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
CA glue and x1 parts https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=109&t=19287 |
Page 1 of 1 |
Author: | NeroWolf [ Sun Mar 20, 2016 12:09:31 ] |
Post subject: | CA glue and x1 parts |
Hi! Talking about X1, I would to know a thing: CA glue must be applied to ALL carbon parts(arms, upper deck, wings holder etc...) or to chassis base and spring holder parts only? Many thanks, bye! |
Author: | Skiddins [ Wed Mar 23, 2016 03:23:05 ] |
Post subject: | Re: CA glue and x1 parts |
We tend to only do the chassis and rear pod plate. Other parts only to look good ![]() |
Author: | koffeekingston [ Wed May 29, 2019 10:20:31 ] |
Post subject: | Re: CA glue and x1 parts |
It is not that easy to get but here I found all the resources. Thanks for keeping all the things available and for the query. |
Author: | suchiabram [ Thu Nov 07, 2019 13:17:54 ] |
Post subject: | Re: CA glue and x1 parts |
Damage or corruption of the printer drivers installed on the system can also cause "". Users experiencing this issue need to completely remove the printer drivers installed on the system using the device manager and then reinstall the printer drivers. This removes all the errors and brings back the printer to its normal state of functioning. |
Author: | native1 [ Wed Nov 13, 2019 15:24:37 ] |
Post subject: | Re: CA glue and x1 parts |
In order to make everything in right way, better follow or instructions or diy on youtube, or check something |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |