| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| X1 Instruction Manual V2 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=109&t=18952 |
Page 1 of 1 |
| Author: | JoJo [ Thu Jan 22, 2015 11:06:50 ] |
| Post subject: | X1 Instruction Manual V2 |
show (1).jpg [ 50.6 KiB | Viewed 4406 times ] XRAY T3 2011 XRAY 308081 - SHOCK ABSORBER MEMBRANE - LOW (4) this is the updated number RX8 RX8 2013 XRAY 308082 - T4 SHOCK ABSORBER MEMBRANE (4) this is the old number Is this perhaps the reason why the membrane does not fit properly in the shock cap. Are the wrong ones supplied in the kit. If so, do we get the right ones from our local suppliers. with regards, Joop Voorn, Netherlands. |
|
| Author: | brano [ Thu Jan 22, 2015 16:37:23 ] |
| Post subject: | Re: X1 Instruction Manual V2 |
There is no error packing. The first batch of X1 featured the T4 shock membranes with foam inserts which were also used by the team during the prototype testing. The recent feedback from the team received suggests to use the older type of the membranes and as such the last batch of X1 was updated as a running change and includes these older type of membranes and foam inserts. |
|
| Author: | JoJo [ Thu Jan 22, 2015 23:11:59 ] |
| Post subject: | Re: X1 Instruction Manual V2 |
I have one of the first batch. Well, no harm done, i have T3 bladders and foams plenty.  Thanks for the clarification. Greetings, Joop Voorn. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|