1/10 Electric OffRoad Buggy

OneKiwi · **Joined:** Sun Dec 09, 2012 21:14:31 **Posts:** 16

I think with the stock ( is it 85) one I got you could fit about a 24/25 T there is a 81 i think spur gear you can get so a few teeth more.

I haven't tried larger than 22 as we don't run stock motors and we have a small tight track

Xyzzy · **Joined:** Tue Aug 21, 2012 04:35:28 **Posts:** 4

I think the stock spur is 81. If so that doesn't leave much room!

Thanks for checking it out for me!

mario · **Posted:** Sun Dec 16, 2012 14:05:54

ps71 · **Joined:** Mon Dec 12, 2011 16:04:01 **Posts:** 7

This is what happend to my brothers diff the third time at the track :cry:

Guess plastic aint fantastic :wink:

Warranty???

DSC01542.JPG [ 100.8 KiB | Viewed 28201 times ]

Z00M · **Posted:** Thu Dec 20, 2012 02:12:41

OneKiwi · **Joined:** Sun Dec 09, 2012 21:14:31 **Posts:** 16

ps71 · **Joined:** Mon Dec 12, 2011 16:04:01 **Posts:** 7

AEE · **Joined:** Mon Dec 03, 2012 18:32:36 **Posts:** 17

the build of my xb4 is ready, took a first ride in the rain..... and whaaaaaaaaaaw :twisted:

tha car is great :!:

grtzz

Tricksy · **Posted:** Fri Dec 21, 2012 19:15:14

ps71 · **Joined:** Mon Dec 12, 2011 16:04:01 **Posts:** 7

My local distributer says no warranty so i put it on here and also send an email to xray

Sorry to not include the info for you, but here you go :wink:

Motor reedy 5.5turn and viper esc
Slipper set to 5.8mm and slips, manual says 5.5-5.7
Track is carpet with some jumps nothing big
I have used a 5.5turn in a durango at the same track without any problem, have an xray now so not happy about this problem at all.
This has however not happend to mine so it may just be bad luck.
Got the steelgears and pins today so no problem with this again i think..

Partnr 335030 & 335080 if you want the steel gears

Did buy this car because of the quality on xray 1/8 buggies, so this was not expected at all

asc6000 · **Joined:** Fri Jan 11, 2013 18:28:58 **Posts:** 6

too much motor, too tight of a slipper
no surprise you stripped gears
and not willing to work within the parameters of the car is going to be a problem no matter what brand you have

garcade · **Joined:** Sat Jan 12, 2013 11:55:38 **Posts:** 1

Then, what is your recomendation with the motor? I just to need to buy the motor and I don't know what turn is better for my XB4.

Many Thanks

j0pp3 · **Joined:** Tue Jan 08, 2013 14:06:01 **Posts:** 5

mark · **Posted:** Wed Jan 23, 2013 17:31:53

Hi,Im just wondering,Xray always have a reason for doing things,why didnt they do the iner hingepin holders so you didnt need to take off the gearbox to change the inserts,with it having the comp gears,i would think having to take it off everytime on a race day would leave it open for the dirt and mess to get in,if you dont use the body mounts,the gearbox has holes in already,
this is in no way a moan,just a query,
thanks

Z00M · **Posted:** Thu Jan 24, 2013 04:49:37

I've changed the inserts in my hinge pin holders on both front and back without taking the gearbox off. I have a pick which I use to remove the dirt from the screw heads which has a bend in it and I can push it through a little bit and then pull them out. A nitro spring hook or any rigid wire you can bend into a curve will do the trick.

mark · **Posted:** Fri Jan 25, 2013 15:53:11

I was having a blond moment

i see they are fitted the right way to come out without taking it off :oops:

XRAY - Model racing cars

1/10 Electric OffRoad Buggy

Who is online