XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
small spur gear eg <69 teeth https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=101&t=19519 |
Page 1 of 1 |
Author: | aussie372 [ Sun Mar 26, 2017 10:29:21 ] |
Post subject: | small spur gear eg <69 teeth |
Does anyone know of a spur gear that is 69 or less , that will fit an XB4 2016 running the standard slipper . In Australia we run 17.5 for 4wd stock . Just having troubles getting the gearing right with the factory gears . Cheers Major Financial Sponsor of https://www.facebook.com/AdenYoungRc/ XRAY , HEI , PROLINE , MUCHMORE TQ & 3rd 2016 Victorian State Titles Junior Stock 2wd XRAY XB2 , XRAY XB4 2016 & XRAY T4 2016 |
Author: | NickMalato [ Thu Mar 30, 2017 03:26:39 ] |
Post subject: | Re: small spur gear eg <69 teeth |
Check this out - http://www.rcshox.com/xray-xb4-slipper-delete-kit/ only 76, but getting there... I know ways for the xb2... |
Author: | aussie372 [ Thu Mar 30, 2017 11:06:02 ] |
Post subject: | Re: small spur gear eg <69 teeth |
Ended up going this way http://bezerk.com.au/shop/product_info. ... cts_id=176 Australian made , ordered Monday night delivered Thursday morning . Can't beat that for service . Uses pretty much any spur gear , so basically endless ratio choices . |
Author: | andyson [ Tue May 02, 2017 06:44:52 ] |
Post subject: | Re: small spur gear eg <69 teeth |
After the various tests on the track I found that the clutch does not work. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |