XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
XB16 Bumpsteer, servo linkage!! Totally not right? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=101&t=19394 |
Page 1 of 1 |
Author: | l0rdr0ck [ Sat Sep 10, 2016 00:59:40 ] |
Post subject: | XB16 Bumpsteer, servo linkage!! Totally not right? |
Greetings, Following the base kit manual, i use the 2mm conical washers on both the c-hubs and the steering plate. This generates an angle from the plate to the hub that is not in line with the A-arm. Making the worst bumpsteer I have ever seen.....Is this how its supposed to be? My Kokomo and K2 are nothing like this in terms of geometry. Am i doing something wrong? Can anyone send me a picture of how there XB4-16 looks? I'm going out of my mind, I can fix it by adding 4mm under the servo posts, removing all the conicals and shimming the top plate by another 1MM to get close to what I think is normal. Any help would be awesome |
Author: | l0rdr0ck [ Tue Sep 13, 2016 21:09:17 ] |
Post subject: | Re: XB16 Bumpsteer, servo linkage!! Totally not right? |
So i flipped the steering bar upside down and removed all shims and its nearly perfect now. Had to trim the body back a bit because it was rubbing but, the setup is dialed. Still seems not right. |
Author: | Martin Bayer [ Sun Dec 11, 2016 09:02:35 ] |
Post subject: | Re: XB16 Bumpsteer, servo linkage!! Totally not right? |
But all cars work very good! When i check my akerman link i donĀ“t see something wrong. Send picture here. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |