XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
grip roll https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=101&t=19283 |
Page 1 of 1 |
Author: | KristofDeBlock [ Mon Mar 14, 2016 16:51:01 ] |
Post subject: | grip roll |
Hi, I need some advice on grip roll, so I cuted the outside pins of my mini spikes tyres. The mini spikes tyres gave much more steering than the stabber tyres. But with the mini spikes I have enorm grip roll. So I cuted the ouside pins of the tyre. Now when I went to early on the throthle the car flipt over even with the cuted tyres. So what can I do to avoid this and get some faster through corners ? Ride height? Front/rear camber was -2 / -3 front toe was +1 rear toe was -3 ride height was 18/19 diffs 10k/10k any advice is more than welcome thx |
Author: | Martin Bayer [ Tue Mar 15, 2016 11:35:10 ] |
Post subject: | Re: grip roll |
Hello Check this set-up: xform/index.php?act=view&ID=74&setup=xb4_2015 We cut 3 row of pins on outside + 1 row on inside and also gluing side walls. |
Author: | KristofDeBlock [ Wed Mar 16, 2016 12:14:24 ] |
Post subject: | Re: grip roll |
Thx Martin ![]() |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |