XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Driveshaft hitting outdrive https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=101&t=18994 |
Page 1 of 1 |
Author: | walste [ Tue Mar 03, 2015 20:38:13 ] |
Post subject: | Driveshaft hitting outdrive |
Sorry for my poor/bad english. I have just build my XB4 2015, and have trouble that the rear right driveshaft ist hitting the outdrive when the suspension is fylly compressed. i built it after this setup I have 3,5mm uptravel limiter on the shock as well. The rear right outdrive seems to be longer out of the diff bulkhead than the left one (see picture). it looks the same in the front of my car, but the driveshaft in front is no problem. |
Author: | kevinpratt823 [ Tue Mar 03, 2015 23:41:58 ] |
Post subject: | Re: Driveshaft hitting outdrive |
I know you saw my thread about this as well. I have used a dremel to grind the notches a little deeper, and give the notches a little angle so the pins don't bottom out on the top when they go vertical. |
Author: | hugin_q3 [ Mon Jul 13, 2015 16:54:41 ] |
Post subject: | Re: Driveshaft hitting outdrive |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |