| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Wheels too big? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=101&t=18647 |
Page 1 of 1 |
| Author: | Peakki [ Sun May 04, 2014 19:39:04 ] |
| Post subject: | Wheels too big? |
http://news.efra.ws/fileadmin/news/2014 ... 0Sizes.pdf I measured my XB4 rear and front V2 wheels. The front wheels were bigger than allowed - tyre bead dia was 55.9-56.1. Some of the rear wheels were okay and some too big. Is this a known thing to Xray? I'm going to EC2014 race this year and would really need my car&stuff&wheels race legal. (Durango front wheels were also too big, didn't have rear wheels to check.) |
|
| Author: | Peakki [ Wed May 28, 2014 09:36:20 ] |
| Post subject: | Re: Wheels too big? |
Would like to have a reply for this from Xray! Other makes have also the same problem (eg. 12mm hex JC wheels and 14mm hex Durango wheels). Unbelievable.  Should we change the rules or demand manufacturers to do wheels that go into specs of the rules?  
|
|
| Author: | mario [ Thu May 29, 2014 07:50:27 ] |
| Post subject: | Re: Wheels too big? |
Sorry, missed this question. Until now there were no problems with the XB4 wheels. However I will need to verify on this. As far I know many other brands have same or even wider wheels as well. |
|
| Author: | Peakki [ Wed Jun 25, 2014 12:09:06 ] |
| Post subject: | Re: Wheels too big? |
Any news about this? Should I go to EC2014 race and try my luck with my over sized wheels? Or grind the beads to rule limits? |
|
| Author: | mario [ Fri Jun 27, 2014 16:51:53 ] |
| Post subject: | Re: Wheels too big? |
EFRA representative for 1/10 off-road confirmed that XB4 wheels are good. |
|
| Author: | darkxer [ Wed Aug 20, 2014 16:34:25 ] |
| Post subject: | Re: Wheels too big? |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|