| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XB4 2wd gear mesh https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=101&t=18570 |
Page 1 of 1 |
| Author: | fmm [ Tue Feb 18, 2014 12:24:44 ] |
| Post subject: | XB4 2wd gear mesh |
Hi all, I have an issue putting together my new XB4 2wd The manual says that I should adjust diff gear mesh by using thin shims (962100) that are included in the kit; however these shims are not included in any of the bags. Should these shims be included in the kit? Someone else has had the same issue? I also have an XB4 4wd and it is not recommended to adjust gear mesh, so is it recommended to adjust it in the XB4 2wd? It is a bit weird as both cars (2wd and 4wd) share the same diff, crown gear and transmission. Thank you in advance! fmm |
|
| Author: | brano [ Wed Feb 19, 2014 07:12:55 ] |
| Post subject: | Re: XB4 2wd gear mesh |
These shims are not included - if you have not correct gear mesh than you have to adjust it on XB4 or XB4 2WD of course. |
|
| Author: | Deano43 [ Thu Feb 27, 2014 21:17:08 ] |
| Post subject: | Re: XB4 2wd gear mesh |
I wondered this but got advised just build it to book so I did the diff is silky smooth and have never encounted a problem at all |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|